<< Click to Display Table of Contents >> Navigation:  GSP environment > Running Simulations >  Specifying simulation input

Simulation input normally are all data that define the gas turbine engine operating conditions in terms of ambient conditions, power setting, engine control settings, engine component condition (deterioration), loads etc. These data should all be defined in the cases in the project tree from which the simulations are run. Except for the ambient or flight conditions specified in the separate Ambient/Flight conditions window, all simulation input data are specified in GSP components depending on the Input access rules. Specific components for simulation input include control components, case controllers, schedulers and auxiliary components.

For both steady-state series and transient simulations, transient input is required to specify the input as a function of point nr. (steady-states) or time (transient).