Cools the gas turbine's flow using water or specify a custom Cp for other fluids as cooling flow.
General
External control of coolant flow
Coolant control input
Input values for both coolant mass flow and coolant temperature
Off-design effectiveness
Fixed effectiveness or effectiveness from map
Design
Specify design HX operating point
Specify the design of the HX using Heat flux, 1st pass flow temp. change, 1st pass flow exit temperature, or Effectiveness.
Coolant
Design input values for both coolant mass flow and coolant temperature. Specify water or a user defined coolant by entering a custom Cp.
Effectiveness map
Define map and heat capacities
Internal heat sink
Define the properties of the internal material of the heat sink (i.e. the material in between the two flows).