Input access rules
<< Click to Display Table of Contents >> Input access rules |
The project based modeling approach with the structured models for configurations (and base configuration model) and cases provides the user with different models to setup different input of the model. This requires a consistent set of rules for input field access. Summarized these rules are:
1.'Configuration-only' and 'Case-only' fields:
Only enabled when either in configuration (or base configuration/reference model) or case project level.
2.DP and OD input field access rules implemented:
Navy blue or otherwise 'DP tagged' input fields only enabled in either configuration project level or Design point or design series case type.
3.Transient/Series or single point:
With single point case type, control component Transient/Series tabs are invisible.
4.For rule 1., allow case input in configurations (note that vice versa (config input in cases) is NEVER allowed).
5.Allow OD input in DP cases (note that vice versa, DP input in OD, is NEVER allowed).
6.Allow editing components with no case type selected.